MPG GUNGNIR 300 MONSTER HUNTER EDITION is covered with a red and gold scheme for Monster Hunter lovers to show off different personalities. It is also powerful because it features Wi-Fi 7 solution, an optimized DDR5 circuit, and the latest PCIe 5.0 M.2 with Screwless M.2 Shield Frozr, and this is the best white Z790 ATX motherboard for Intel® 14th Gen and 13th Gen Core processors.
- POTENTIAL FOR COOLING
- OPTIMIZED AIRFLOW
- FAN SUPPORT
- RADIATOR SUPPORT
POTENTIAL FOR COOLING
- Supports 360 mm radiators at the front and top simultaneously.
- Up to 10 fans simultaneously
- Reserve 80 mm at the top and front to support Push-Pull cooling layout.
Optimized AirFlow Possibility
The front panel features perforated mesh, compared to the typical mesh, which can filter out most dust. While the side panel and PSU shroud both have vents for airflow. If using the fans Push-Pull configuration, this case can install up to 10 x 120 mm fans for maximum cooling.
Fan Support
120mm
140mm
Radiator Support
120mm
140mm
- Left and Right Versatile Bracket
- Depth Slider
- Height Adjustable
- 90-degree rotation
Omnidirectional Graphics Card Stand
The graphics card stand can be easily adjusted for different graphics card sizes and installation methods without the need for any tools, making it a diy-friendly design that allows for changing the optimal support position effortlessly.
- HARDWARE SUPPORT
- STORAGE YOU NEED
-
Motherboard form factor support: E-ATX(up to 280 x 305 mm)/ ATX / M-ATX / ITX
-
CPU cooler maximum height: 175 mm
-
GPU maximum length: 360 mm
-
Power supply: up to 220 mm (Keep enough space for cable routing.)
- 1 Side 2 x 2.5”
- 2 MB Back 2 x 2.5”
- 3
Drive Cage
2 x 2.5”
2 x 3.5” - 4 PSU Shroud 2 x 2.5”
- USER FRIENDLY
- DUST PROTECTION
Push-latches construction on the multiple function cable cover, PCIe bracket and side panel.
Easy to adjustment construction
Cable management
All around DUST filter
The MPG GUNGNIR 300 series’ front features large surfaced 1 mm perforated front panel. This is so airflow can be let into the system while blocking dust from entering the system en masse. For the other side of the case, dust filters are located around the computer case, Effectively prevent the entry of fine particles and enhance the convenience of cleaning.
INSTA-LIGHT LOOP BUTTON
Control your fan lighting through the LED switch button with pre-build control board, creating your very own customizable ARGB station. Showcase your impressive hardware arsenal with the sleek and modern touch of a tempered glass side panel.
- Switch Button
- 3 mm tempered glass
Connectable Front I/O
- 2x USB 3.2 Gen 1 Type-A
- 1x USB 3.2 Gen 2x2 Type-C
- Mic In / Audio Out
- LED Switch Button
- Reset Button
- Power Button
MPG GUNGNIR 300 MONSTER HUNTER EDITION
- One-piece 1 mm perforated front panel, supporting dual 360 mm AIO liquid cooler at front/top and Push-Pull setup.
- Fully support high-end graphics card no matter vertical or horizontal installation and also reserves enough space to ensure cooling and cable bending.
- Omnidirectional graphics card stand can adjust in many ways to support different graphics card installation.
- Patented DIY friendly design for easy to assemble.
- 4 x 120 mm ARGB fans pre-installed (Mystic Light compatible).
- E-ATX (280 x 305 mm), ATX, Micro-ATX and Mini-ITX motherboard & 360 mm GPU capacity.
- 1 x USB 3.2 Gen 2x2 Type-C port (20Gbps) & 2 x USB 3.2 Gen 1 Type-A ports (5Gbps).
All images and descriptions are for illustrative purposes only. Visual representation of the products may not be perfectly accurate. Product specification, functions and appearance may vary by models and differ from country to country . All specifications are subject to change without notice. Please consult the product specifications page for full details.Although we endeavor to present the most precise and comprehensive information at the time of publication, a small number of items may contain typography or photography errors. Products may not be available in all markets. We recommend you to check with your local supplier for exact offers.